How do you mix Corid in water?
In Drinking Water Mix CORID daily with fresh drinking water. Stock solution for water proportioners may be stored in a clean, closed, labeled container for up to 3 days. 5-DAY TREATMENT: Add CORID 20% Soluble Powder to drinking water at the rate of 4 oz/50 gal. One 10 oz pack to 125 gallons of water.
How does Corid work?
When CORID works By acting on the youngasexual stages of the coccidia life cycle, CORID allows exposure to first-generationschizonts, so the host animal can develop natural immunity to coccidia. This makesCORID effective as a preventive therapy.
Is Corid harmful to humans?
NOT FOR HUMAN USE. Keep this and all drugs out of the reach of children. The Material Safety Data Sheet (MSDS) contains more detailed occupational safety information.
How much Corid does a sheep need?
Treatment (as a drench): Add 3 fl oz. to 1 pt of water and, with a dose syringe, give 1 fl oz of this solution for each 100 lb body weight. This will provide a dose of approximately 10 mg ampolium/kg (2.2 lb) body weight. Give daily for 5 days.
What will Corid treat?
Aids in the treatment and prevention of bloody scours caused by Eimeria bovis and E. zurnii in calves. Palatable and readily accepted by cattle. Safe when administered at the recommended dose.
Is Amprolium harmful to humans?
Amprolium is rapidly (within hours) eliminated from the organism via kidneys. It is commercially available in formulations for oral administration (oral solution for administration to drinking water). It has no adverse effects and is considered one of the safest anticoccidial drugs.
What do you use Corid for?
This amprolium powder is an aid in the treatment and prevention of bovine coccidiosis caused by Eimeria bovis and Eimeria zurnii in calves. Use this bovine coccidiosis treatment as directed.
How much corid do you use per gallon of water?
Use Corid 9.6% liquid solution. 9.5cc to a gallon of water. Treat for five days mixing up a fresh batch every day. If you are using powder Corid use around (err on slightly less) than 1/2 teaspoon of powder per gallon.
When to use corid 9.6% oral solution?
5-DAY TREATMENT. Add Corid 9.6% Oral Solution to drinking water at the rate of 16 fl oz/100 gal. At the usual rate of water consumption this will provide an intake of approximately 10 mg amprolium/kg (2.2 lb) body weight. Offer this solution as the only source of water for 5 days. Use on a herd basis only; when one or more calves show signs…
How much Amprolium does corid add to water?
Add Corid 9.6% Oral Solution to drinking water at the rate of 16 fl oz/100 gal. At the usual rate of water consumption this will provide an intake of approximately 10 mg amprolium/kg (2.2 lb) body weight.
How often should you drink water after taking corid?
Dosage for the Corid 20% soluable powder is 1 teaspoon per gallon of water for 5-7 days. Make it fresh daily and dont add anything else to the mixture. There isnt a withdrawal period after using corid. It must be their sole source of water to drink. In this thread, someone else said 1/2 teaspoon per gallon of water.
How much water do you need to mix with corid?
Choose how much water you need and mix with CORID (amprolium) 9.6% Solution. Choose how much water you need and mix with CORID (amprolium) 9.6% Solution.
How to treat coccidiosis with water and corid?
Mix water + CORID to make a drench solution. CORD Powder: I ounce = 31/2 tablespoons I ounce = 28.35 grams *The expected rate of water consumption is approximately 2 gallons of water per day per 100 pounds of calf body weight. Choose CORID (amprolium) 9.6% Solution or CORID 20% Soluble Powder. Mix water + CORID to make a drench solution.
How much Amprolium is in corid 9.6% oral solution?
USE DIRECTIONS: There are 96 mg of amprolium in every 1 mL of CORID 9.6% Solution. Mix CORID daily with fresh drinking water. 5-DAY TREATMENT: Add CORID 9.6% Oral Solution to drinking water at the rate of 16 fl oz/100 gal. At the usual rate of water consumption this will provide an intake of approximately 10 mg amprolium/kg (2.2 lb) body weight.
How to take corid 9.6% for 5 days?
5-DAY TREATMENT: Add 3 fl oz CORID 9.6% Oral Solution to 1 pt of water and, with a dose syringe, give 1 fl oz of this drench solution for each 100 lb (45 kg) body weight. This will provide a dose of approximately 10 mg amprolium/kg (2.2 lb) body weight. Give daily for 5 days.